Flip the transceiver upside down so the bottom cover faces up.
Enables the radio to be used for FM repeaters on the 10-meter band, especially when combined with the UT-20 Tone Encoder . Pre-Installation Requirements Before beginning, ensure you have the following: Icom UI-7 Unit Phillips Head Screwdriver (size #1 or #2) Static-Safe Work Surface (recommended)
The installation process takes approximately 15–30 minutes. 1. Preparing the Transceiver
Remove the screws from the top and bottom covers of the transceiver.
Flip the transceiver upside down so the bottom cover faces up.
Enables the radio to be used for FM repeaters on the 10-meter band, especially when combined with the UT-20 Tone Encoder . Pre-Installation Requirements Before beginning, ensure you have the following: Icom UI-7 Unit Phillips Head Screwdriver (size #1 or #2) Static-Safe Work Surface (recommended) icom ui7 am fm unit install
The installation process takes approximately 15–30 minutes. 1. Preparing the Transceiver Flip the transceiver upside down so the bottom
Remove the screws from the top and bottom covers of the transceiver. icom ui7 am fm unit install