Felder Ad741 Manual New -

Lower the surface planing tables to their lowest position if required, unlock them, and lift them up into the vertical storage position.

| Problem | New Fix (per 2023+ manual) | | :--- | :--- | | | Increase pressure on the anti-kickback fingers. Check planer table rollers (they should be 0.1mm above the table). | | Chatter marks on jointed face | Your V-belt tension is too low. Use the belt tension gauge method (page 58). | | Fence does not lock firmly | The cam lock linkage needs grease; do not over-tighten the handle. | | Digital scale flashes "Err" | Battery low (CR2032) OR the magnetic strip is contaminated with metal dust. Clean with isopropyl alcohol. | felder ad741 manual new

Use the manual adjustment lever to fine-tune this height, then lock it into position. 4. Maintenance and Lubrication Schedules Lower the surface planing tables to their lowest

The new fence design minimizes the machine's space requirement, allowing it to be placed closer to workshop walls without sacrificing the ability to tilt from 90° to 45°. Essential Manual & Setup Tips | | Chatter marks on jointed face |

What is the or generation of your AD 741?

Before operating the Felder AD 741, it is vital to understand its physical capabilities and electrical requirements. The machine is built on a torsion-resistant solid steel chassis, designed to absorb vibrations during heavy stock removal. Technical Data Overview 410 mm (16.1 inches) Surface Table Length: 2000 mm (78.7 inches) Maximum Depth of Cut (Planing): 5 mm Thicknessing Width: 404 mm