Xerox Fault Code 043-343 -

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Replacing the main drive assembly is a highly intensive task that involves unwiring numerous components. If your machine is not under a service contract, the complexity of this repair often makes it more cost-effective to consult a professional or consider a machine replacement. Xerox Fault Code 043-343

The Machine Control Unit (MCU) board, which distributes power and commands to the motors, fails to send or receive the correct signals. Step-by-Step Troubleshooting Protocol This public link is valid for 7 days

Input the diagnostic command code to initialize the 1st BTR (Bias Transfer Roller). Can’t copy the link right now

Turn off the main power switch located inside the front door or on the side of the machine. Unplug the main power cord from the wall outlet.

: Damaged, shorted, or open circuits between the sensor/solenoid and the Drive PWB (Printed Wiring Board).

: Verify there are no open or short circuits between the YMC link solenoid (P/J203) and the Drive PWB (P/J413).