The software utility will detect the boot signal from the meter. A progress bar will track the data transfer, followed by a second progress bar showing the flash chip erasing and burning the new data. Step 6: Post-Upgrade Verification
Right-click the Windows Start menu and select . Expand the Ports (COM & LPT) section. satlink ws6906 software upgrade
Once the update is complete, your Satlink WS-6906 will be loaded with the latest satellite information. Go to the menu of your device and scan to verify that new satellites are appearing. The software utility will detect the boot signal
Modern computers lack serial ports. If your PC does not have one, you will need a compatible USB-to-Serial converter cable (ensure the drivers for this adapter are fully installed on your PC). 2. Software Requirements Expand the Ports (COM & LPT) section
the Upgrade.exe as an administrator (right-click, "Run as administrator"). 2. Connect the Device Connect the 3-pin end of the RS-232 cable to the WS-6906. Connect the USB end to your computer. Turn on your Satlink WS-6906. 3. Start the Upgrade Tool Open the software.
This indicates a corrupted flash or a "bricked" unit. You will need to re-attempt the process using a confirmed factory-default firmware recovery file. Post-Upgrade Optimization
