The motherboard has 6 storage headers. Only 2 ports are SATA III (6 Gb/s) , while the remaining 4 are SATA II (3 Gb/s) . Attach your primary boot Solid State Drive (SSD) strictly to a SATA III port for maximum read/write capability. Use the SATA II lines for slower mechanical hard drives.
There are two 9-pin USB headers (USB1 and USB2). Standard pinout: Red (+5V), White (D-), Green (D+), Black (Ground). Pin 9 is N/C. acer ipimbar rev 102a manual new
Why won't my system boot past the BIOS screen after upgrading the graphics card? The motherboard has 6 storage headers
This article provides a comprehensive manual replacement—covering specifications, jumper settings, front panel pinouts, BIOS recovery, and where to find official documentation. Use the SATA II lines for slower mechanical hard drives
Look for version or P01-A5 (dates vary). You can find this at Acer's support site under your PC model's "Firmware" tab.
| Feature | Details | |---------|---------| | | Micro-ATX (24.4 cm x 21.8 cm) | | CPU Socket | LGA 1155 | | Supported CPUs | Intel Core i7, i5, i3, Pentium, Celeron (G620, i3-2100, i5-2400, etc.) | | Chipset | Intel H61 Express | | Memory | 2 x DDR3 DIMM slots, max 16GB, 1066/1333 MHz (non-ECC) | | Expansion Slots | 1 x PCIe x16, 1 x PCIe x1, 1 x PCI | | Storage | 4 x SATA 2.0 (3 Gb/s), no native SATA 3 (6 Gb/s) | | Rear I/O | PS/2 keyboard, PS/2 mouse, VGA, HDMI, 4 x USB 2.0, RJ-45 LAN, 3 audio jacks | | Audio | Realtek ALC662 (5.1 channel) | | LAN | Realtek RTL8111E (Gigabit) |